This is the Tekno RC 1/10 scale SCT410.3 short course truck.
Tekno
RC is proud to announce the newest revision to our stable of innovative
RC vehicles – The SCT410.3 1/10th 4×4 Competition Short Course Truck.
The SCT410.3 is an updated version of the original SCT410 with a slew of
new parts and improvements. The SCT410.3 leapfrogs over the 4×4 SC
competition in terms of performance and durability. There’s nothing like
a fresh new kit that is put together easily, so pick up the SCT410.3
race kit and unleash it on the competition!
Includes: SCT410.3 4x4 Kit with Shocks, Shock and Diff Oil, Decals and Instructions
Requires:
- 2-channel Radio with high torque steering servo
- Short course brushless motor
- 11-30 tooth pinion gear Tekno RC MOD1 recommended or Tekno RC Traktion Drive/Electri-Clutch System
- Compatible ESC with selected motor
- 2S LiPo battery
- Compatible battery charger with selected battery
- 1/10 scale short course body
- Short course wheels with 12mm hex
- Short course tires
- Building and track equipment
features
- Chassis: CNC aluminum 0.16" (4mm) thick, anodized black in color with short front and rear overhang for better bump handling and jump landing, adjustable front, center, and rear chassis braces for fine tuning flex
- Drive: Four wheel aluminum shaft drive with CVDs with captured pins
- Motor Mount: LCG lightened
- Differentials: Bevel gear
- Bumpers: Front and rear
- Shocks: Oil-filled 16mm bore hard anodized with conical piston design for varied compression and rebound rates, 4mm diameter steel shafts
- Shock Towers: CNC aluminum 0.16" (4mm) thick
- Suspension: Adjustable long travel design with adjustable length rear arms, and adjustable front arm sweep and angle, front and rear sway bars
- Steering: Ball bearing supported, narrow pivot posts, adjustable bump-steer and Ackerman, Ackerman describes the effect of the inside front wheel turning faster than the outside front wheel during turns
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Battery Tray: 2.0x5.8" (50x148mm)
specs
Length: 20.87" (530mm)
Width: 11.65" (296mm)
Wheelbase: 12.7-13.2" (323-335mm)
Weight: 6.6lbs (3000g) ready to run, approximately
Differential Ratio: F/R 10-40t, center 44t
Tekno RC SCT410.3 1/10 4WD SC Truck TKR5507 Tekno RC ARID0169
- Product Code: ARID0169
This is the Tekno RC 1/10 scale SCT410.3 short course truck.
Tekno
RC is proud to announce the newest revision to our stable of innovative
RC vehicles – The SCT410.3 1/10th 4×4 Competition Short Course Truck.
The SCT410.3 is an updated version of the original SCT410 with a slew of
new parts and improvements. The SCT410.3 leapfrogs over the 4×4 SC
competition in terms of performance and durability. There’s nothing like
a fresh new kit that is put together easily, so pick up the SCT410.3
race kit and unleash it on the competition!
Includes: SCT410.3 4x4 Kit with Shocks, Shock and Diff Oil, Decals and Instructions
Requires:
- 2-channel Radio with high torque steering servo
- Short course brushless motor
- 11-30 tooth pinion gear Tekno RC MOD1 recommended or Tekno RC Traktion Drive/Electri-Clutch System
- Compatible ESC with selected motor
- 2S LiPo battery
- Compatible battery charger with selected battery
- 1/10 scale short course body
- Short course wheels with 12mm hex
- Short course tires
- Building and track equipment
features
- Chassis: CNC aluminum 0.16" (4mm) thick, anodized black in color with short front and rear overhang for better bump handling and jump landing, adjustable front, center, and rear chassis braces for fine tuning flex
- Drive: Four wheel aluminum shaft drive with CVDs with captured pins
- Motor Mount: LCG lightened
- Differentials: Bevel gear
- Bumpers: Front and rear
- Shocks: Oil-filled 16mm bore hard anodized with conical piston design for varied compression and rebound rates, 4mm diameter steel shafts
- Shock Towers: CNC aluminum 0.16" (4mm) thick
- Suspension: Adjustable long travel design with adjustable length rear arms, and adjustable front arm sweep and angle, front and rear sway bars
- Steering: Ball bearing supported, narrow pivot posts, adjustable bump-steer and Ackerman, Ackerman describes the effect of the inside front wheel turning faster than the outside front wheel during turns
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Battery Tray: 2.0x5.8" (50x148mm)
specs
Length: 20.87" (530mm)
Width: 11.65" (296mm)
Wheelbase: 12.7-13.2" (323-335mm)
Weight: 6.6lbs (3000g) ready to run, approximately
Differential Ratio: F/R 10-40t, center 44t
- Brand: Tekno RC
- Availability: In Stock
$217.81
Tags: tekno truck sct410 tkr5507 Tekno SCT410.3 1/10 Truck TKR5507 Car & Truck Car & Truck Tekno RC SCT410.3 1/10 4WD SC Truck TKR5507 Tekno RC SCT410.3 1/10 4WD SC Truck TKR5507 Car & Truck