This is the 1/12 scale Tamiya XR311 Combat Support Vehicle Kit.
A
reissue of a reissue - the XR311 was the original reissue that started
it all way back in 2000 - now Tamiya is unleashing this kit again for
2012 (because the release in 2000 was very limited and not available
worldwide).
The Tamiya XR311 is a re-release kit that was
originally available in 1977. The XR311 was Tamiya's first suspension
equipped RC buggy. The 2012 re-release incorporates modern innovations
and improvements while maintaining the basic layout of the classic
original.
Includes: One
1/12 scale Tamiya XR311 Combat Support Vehicle Kit with Tires, Wheels,
ESC, Body, Driver Figure, Motor and Instruction Manual
Requires:
- Radio: 2-channel with high torque steering servo
- Battery: 7.2V NiMH stick pack with standard connector
- Battery Charger: To match selected battery
- Track and maintenance equipment
features
- Chassis: Duralumin 52S, natural finish
- Drive: Rear wheel
- Motor: Mabuchi RS540SH brushed
- Pinion Gear: 15 tooth
- Electronic Speed Control: TEU-104BK with reverse
- Suspension: Torsion bar with all wheels independently sprung, upper and lower H-arms
- Steering: Two equal length tie rods
- Gearbox: Fully enclosed, may be assembled with one of three different gear ratios
- Body: Injection molded, camouflage green in color with cockpit details
- Driver Figure: Molded white plastic
- Wheels: Three-piece plastic, camouflage green in color
- Tires: Rubber, all terrain
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
specs
Vehicle
Length: 15.9" (405mm)
Width: 6.8" (173mm)
Height: 5.3" (135mm)
Ground Clearance: 0.59" (15mm)
Wheelbase: 10.2" (260mm)
Tread: distance from outer edges of tires side-to-side
Front: 5.5" (140mm)
Rear: 5.7" (144mm)
Body
Length: 14.1" (359mm)
Width: 6.2" (157mm)
Height: 3.2“ (82mm)
Tamiya XR311 Combat Support Vehicle 1/12 Military Kit TAM58004
- Product Code: ARID0313
This is the 1/12 scale Tamiya XR311 Combat Support Vehicle Kit.
A
reissue of a reissue - the XR311 was the original reissue that started
it all way back in 2000 - now Tamiya is unleashing this kit again for
2012 (because the release in 2000 was very limited and not available
worldwide).
The Tamiya XR311 is a re-release kit that was
originally available in 1977. The XR311 was Tamiya's first suspension
equipped RC buggy. The 2012 re-release incorporates modern innovations
and improvements while maintaining the basic layout of the classic
original.
Includes: One
1/12 scale Tamiya XR311 Combat Support Vehicle Kit with Tires, Wheels,
ESC, Body, Driver Figure, Motor and Instruction Manual
Requires:
- Radio: 2-channel with high torque steering servo
- Battery: 7.2V NiMH stick pack with standard connector
- Battery Charger: To match selected battery
- Track and maintenance equipment
features
- Chassis: Duralumin 52S, natural finish
- Drive: Rear wheel
- Motor: Mabuchi RS540SH brushed
- Pinion Gear: 15 tooth
- Electronic Speed Control: TEU-104BK with reverse
- Suspension: Torsion bar with all wheels independently sprung, upper and lower H-arms
- Steering: Two equal length tie rods
- Gearbox: Fully enclosed, may be assembled with one of three different gear ratios
- Body: Injection molded, camouflage green in color with cockpit details
- Driver Figure: Molded white plastic
- Wheels: Three-piece plastic, camouflage green in color
- Tires: Rubber, all terrain
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
specs
Vehicle
Length: 15.9" (405mm)
Width: 6.8" (173mm)
Height: 5.3" (135mm)
Ground Clearance: 0.59" (15mm)
Wheelbase: 10.2" (260mm)
Tread: distance from outer edges of tires side-to-side
Front: 5.5" (140mm)
Rear: 5.7" (144mm)
Body
Length: 14.1" (359mm)
Width: 6.2" (157mm)
Height: 3.2“ (82mm)
- Brand: Tamiya
- Viewed: 42
- Availability: In Stock
$151.98
Tags: tamiya xr311 combat support vehicle military tam58004 truck Tamiya XR311 Combat Support Vehicle 1/12 Military TAM58004 Car & Truck Car & Truck Tamiya XR311 Combat Support Vehicle 1/12 Military Kit TAM58004 Tamiya XR311 Combat Support Vehicle 1/12 Military Kit TAM58004 Car & Truck