This is the Tamiya Subaru Impreza WRX Sti Kit. The Tamiya R/C
assembly kit precisely replicates the Subaru Impreza in every detail for
Rally R/C enthusiasts looking for the next level in a performance and
realism.
The 4WD XV-01 chassis offers dynamic R/C rally driving
on both tarmac and gravel surfaces. It features a front-motor,
belt-driven 4WD layout with front and rear enclosed gearboxes equipped
with gear differential units. The box-like main frame incorporates
covers and wheel well liners to provide superb protection against dirt
and debris. The 4-wheel double wishbone suspension ensures plenty of
suspension stroke and ground clearance and is matched with Rally Block
Tires on replica wheels for realistic handling.
Includes:
XV-01 Pro Chassis Kit with Shocks, Shock Oil, Tires, Foam Inserts,
Wheels, Decals, Spur Gear, Pinion Gear, Clear Body and Instruction
Manual
Requires:
- Radio: 2-channel with high-speed steering servo
- ESC: For 540 size brushed motor, must handle at least 23 turn motor
- Battery: 7.2V 6-cell stick pack with Standard connector
- Building and track equipment
features
- Chassis: Molded plastic with front and rear wheel well liners for protection against mud
- Drive: Four wheel reinforced belt drive
- Motor: 540 size brushed
- Differentials: Bevel gear
- Steering: Long tie-rod system to reduce bump steer, high torque servo saver
- Suspension: Double wishbone, reversible rear suspension for off-road driving and toe angle setting changes
- Ball Bearings: Full set
- Shocks: CVA oil-filled plastic body
- Battery Access: Hatch on underside of chassis
- Tires: Rally block 1.02" (26mm) wide, 2.6" (65.4mm) diameter with foam inserts
- Wheels: 16 spoke white plastic, 1" (25.4mm) wide, 1.9" (48mm) diameter, 12mm hex
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, front and rear caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
- Body: Clear untrimmed polycarbonate
- Bumper: Front, urethane foam
- Spur Gear: 68 tooth plastic
- Pinion Gear: 22 tooth steel
specs
Vehicle
Length: 15.1" (384mm)
Width: 7.3" (185mm)
Wheelbase: 10.1" (257mm)
Body
Length: 17" (432mm)
Width: 7" (178mm)
Height: 4.1" (105mm)
Tamiya Subaru Impreza WRX Sti 1/10 Car Kit TAM58528 Tamiya ARID0284
- Product Code: ARID0284
This is the Tamiya Subaru Impreza WRX Sti Kit. The Tamiya R/C
assembly kit precisely replicates the Subaru Impreza in every detail for
Rally R/C enthusiasts looking for the next level in a performance and
realism.
The 4WD XV-01 chassis offers dynamic R/C rally driving
on both tarmac and gravel surfaces. It features a front-motor,
belt-driven 4WD layout with front and rear enclosed gearboxes equipped
with gear differential units. The box-like main frame incorporates
covers and wheel well liners to provide superb protection against dirt
and debris. The 4-wheel double wishbone suspension ensures plenty of
suspension stroke and ground clearance and is matched with Rally Block
Tires on replica wheels for realistic handling.
Includes:
XV-01 Pro Chassis Kit with Shocks, Shock Oil, Tires, Foam Inserts,
Wheels, Decals, Spur Gear, Pinion Gear, Clear Body and Instruction
Manual
Requires:
- Radio: 2-channel with high-speed steering servo
- ESC: For 540 size brushed motor, must handle at least 23 turn motor
- Battery: 7.2V 6-cell stick pack with Standard connector
- Building and track equipment
features
- Chassis: Molded plastic with front and rear wheel well liners for protection against mud
- Drive: Four wheel reinforced belt drive
- Motor: 540 size brushed
- Differentials: Bevel gear
- Steering: Long tie-rod system to reduce bump steer, high torque servo saver
- Suspension: Double wishbone, reversible rear suspension for off-road driving and toe angle setting changes
- Ball Bearings: Full set
- Shocks: CVA oil-filled plastic body
- Battery Access: Hatch on underside of chassis
- Tires: Rally block 1.02" (26mm) wide, 2.6" (65.4mm) diameter with foam inserts
- Wheels: 16 spoke white plastic, 1" (25.4mm) wide, 1.9" (48mm) diameter, 12mm hex
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, front and rear caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis
- Body: Clear untrimmed polycarbonate
- Bumper: Front, urethane foam
- Spur Gear: 68 tooth plastic
- Pinion Gear: 22 tooth steel
specs
Vehicle
Length: 15.1" (384mm)
Width: 7.3" (185mm)
Wheelbase: 10.1" (257mm)
Body
Length: 17" (432mm)
Width: 7" (178mm)
Height: 4.1" (105mm)
- Brand: Tamiya
- Viewed: 11
- Availability: In Stock
$158.79
Tags: tamiya subaru impreza tam58528 truck Tamiya Subaru Impreza 1/10 TAM58528 Car & Truck Car & Truck Tamiya Subaru Impreza WRX Sti 1/10 Car Kit TAM58528 Tamiya Subaru Impreza WRX Sti 1/10 Car Kit TAM58528 Car & Truck