• Chassis: Aluminum 0.08" (2mm) thick,
• Two Upper Decks; original 0.084" (2.15mm) new 0.07" (1.75mm)
• Lower Deck; carbon fiber 0.084" (2.15mm) thick
• Front and rear lower bulkhead parts have 3 attachment points that allow alteration of chassis rigidity and flex
• Drive: Four wheel, with front and rear drive belts, steel center pulley shaft, universal driveline, front direct coupler spool
• Rear Differential: Oil-filled, gear type
• Motor Mount: Aluminum
• Shocks: Super short TRF oil-filled, adjustable shock angle
• Shock Towers: Carbon fiber-positioned lower than the previous version for lower center of gravity and to be compatible with Tamiya low nose sports car body sets, towers are now secured to chassis using two screws to allow more chassis flex
• Bumper: Front foam
• Battery Mount: Aluminum, slotted to allow the use of strapping tape to secure battery
• Servo Mount: Two-piece carbon fiber and aluminum
• Suspension: Four wheel independent, aluminum mounts, stabilizers are attached using ball connectors, redesigned front/rear with attachment points in dedicated racing positions only, adjustable shock angle, sway bar mounts fitted with stabilizer stoppers
• Ball Bearings: Full set included
• Spur Gear: Composite plastic, 116T
• Caster: Adjustable front and rear, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable front and rear, bulkheads now have detachable inner camber link mounts for precise adjustment of camber linkage length, predrilled holes eliminated, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

Scale: 1/10

Construction type: Assembly kit

Terrain use: On-Road

Drive-train: 4WD

Drive type: Belt

Drive line: Universal

Differential type: Rear oil-filled gear diff/front spool

Suspension: Fully independent double wishbone

Steering mechanism: Bell-crank

Shock damper: Oil-filled damper

Shock damper material: Aluminum

Tire type: Not included

Chassis material: Aluminum

Electronic Speed Control (ESC): Not included

Motor: Not included

Bearings: Shielded ball bearing

Adjustable camber: Yes

Adjustable toe angles: Front and rear

Adjustable ground clearance: Yes

Adjustable gear ratio: Yes

Adjustable wheelbase: Yes

Adjustable track width: Yes

Adjustable shock angle: Yes

Special feature 1: Includes both a new 2mm thickness aluminum chassis, and the original 2.15mm thickness carbon fiber lower deck, letting the driver switch according to the surface conditions they are running on.

Special feature 2: Both the new 1.75mm thick carbon fiber and the original 2mm thick carbon fiber upper decks are included.

Special feature 3: Super short TRF dampers are combined with TRF419X suspension arms.

Special feature 4: Front and rear lower bulkhead parts have 3 attachment points, allowing alteration of chassis rigidity and flex. Bulkhead parts can be fitted with upper arm spacers for a greater range of setup options.

Special feature 5: 2 types of ballast weight are included.