This is the Tamiya Nissan Skyline GT-R R33 TT-02D on-road car. The
TT-02 chassis is Tamiya's standard entry level 4WD full independent
suspension assembly kit that offers ease of assembly and easy
maintenance. The TT-02D is the Drift Spec variant that includes special
parts to make it a fun to drive drifting machine.
This kit
includes the iconic R33, fourth generation Nissan Skyline GT-R body
which sit atop the TT02D chassis. The full size Nissan vehicle was 13cm
longer than its R32 predecessor, with a wheelbase extended by 10.5cm.
The body was also widened and strengthened, and given an adjustable rear
spoiler. Other features on this high-powered car included ATTESA E-TS
4-wheel drive system and Brembo brakes.
Includes:
Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires,
Clear Body, 70 tooth Spur Gear, 22 tooth Pinion, ESC, Decals, Window
Masks, Instructions and Wheels
Requires:
- Radio: 2-channel with high speed steering servo
- Battery: 7.2V NiMH
- Battery Charger: To match selected battery
- Building and track equipment
features
- Chassis: Plastic, bathtub type with skid shaped underside to minimize contact with the road surface
- Drive: Four wheel, shaft driven
- Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
- Electronic Speed Control: Tamiya TBLE-02
- Differential: Gear type
- Tires: Slick rubber construction, Super Driftech 0.94" (24mm) wide
- Wheels: Silver colored mesh type, 1.9" diameter (48.2mm), 0.94" (24mm) wide, 12mm hex, +2º offset
- Ball Bearings: Shielded
- Suspension: Fully independent double wishbone
- Shocks: CVA Super Mini oil-filled plastic body
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Steering: Bellcrank type
- Body: Clear untrimmed Nissan Skyline GT-R with decals and window masks
- Bumper: Front, foam
specs
*Specs such as finished size and weight of vehicle not provided by manufacturer*
Body
Length: 18.1" (460mm)
Width: 6.9" (176mm) behind front wheels, widest point 7.5" (190mm) at rear wheels, widest point
Height: 4.2" (106mm)
Tamiya Nissan Skyline GT-R R33 TT-02D On-Road TAM58604 Tamiya ARID0433
- Product Code: ARID0433
This is the Tamiya Nissan Skyline GT-R R33 TT-02D on-road car. The
TT-02 chassis is Tamiya's standard entry level 4WD full independent
suspension assembly kit that offers ease of assembly and easy
maintenance. The TT-02D is the Drift Spec variant that includes special
parts to make it a fun to drive drifting machine.
This kit
includes the iconic R33, fourth generation Nissan Skyline GT-R body
which sit atop the TT02D chassis. The full size Nissan vehicle was 13cm
longer than its R32 predecessor, with a wheelbase extended by 10.5cm.
The body was also widened and strengthened, and given an adjustable rear
spoiler. Other features on this high-powered car included ATTESA E-TS
4-wheel drive system and Brembo brakes.
Includes:
Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires,
Clear Body, 70 tooth Spur Gear, 22 tooth Pinion, ESC, Decals, Window
Masks, Instructions and Wheels
Requires:
- Radio: 2-channel with high speed steering servo
- Battery: 7.2V NiMH
- Battery Charger: To match selected battery
- Building and track equipment
features
- Chassis: Plastic, bathtub type with skid shaped underside to minimize contact with the road surface
- Drive: Four wheel, shaft driven
- Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
- Electronic Speed Control: Tamiya TBLE-02
- Differential: Gear type
- Tires: Slick rubber construction, Super Driftech 0.94" (24mm) wide
- Wheels: Silver colored mesh type, 1.9" diameter (48.2mm), 0.94" (24mm) wide, 12mm hex, +2º offset
- Ball Bearings: Shielded
- Suspension: Fully independent double wishbone
- Shocks: CVA Super Mini oil-filled plastic body
- Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Steering: Bellcrank type
- Body: Clear untrimmed Nissan Skyline GT-R with decals and window masks
- Bumper: Front, foam
specs
*Specs such as finished size and weight of vehicle not provided by manufacturer*
Body
Length: 18.1" (460mm)
Width: 6.9" (176mm) behind front wheels, widest point 7.5" (190mm) at rear wheels, widest point
Height: 4.2" (106mm)
- Brand: Tamiya
- Viewed: 2
- Availability: In Stock
$121.19
Tags: tamiya nissan skyline road tam58604 truck Tamiya Nissan Skyline GT-R TT-02D On-Road TAM58604 Car & Truck Car & Truck Tamiya Nissan Skyline GT-R R33 TT-02D On-Road TAM58604 Tamiya Nissan Skyline GT-R R33 TT-02D On-Road TAM58604 Car & Truck