The ready-to-run Pro Boat® UL-19 30-inch Brushless Hydroplane.
Its design is ultra sleek, with no turbine housing or rear spoiler. And
boy is it fast-you can cruise up to speeds of 50+ mph on 6S power thanks
to the 6-pole water-cooled motor and 120A ESC. A waterproof Spektrum™
3KG servo lets you take corners at full speed without fear! On top of
that, the UL-19, which is built to NAMBA race specifications, comes
equipped with all the aluminum running gear you need and a stainless
steel turn fin. This is adrenaline-pumping, heart-pounding action you
won't soon forget.
Lightweight, durable fiberglass hull with matching canopy and removable vertical fins
Because
the hull is lightweight and durable, you can push this hydroplane to
max speeds in race condition waters. The canopy, like the hull, is
constructed of hand-laid fiberglass. The vertical fins are removable and
replaceable. In case of a bad crash, they will simply break away
without damaging the hull.
Extreme power from waterproof electronics
The
UL-19 uses a Dynamite® water-cooled 120A, 2-6S ESC that can handle more
amperage than needed to run the boat with authority and speed. The new
2000Kv 6-Pole motor features a large rotor that greatly increases motor
torque.
Stainless steel two-blade propeller
An
aggressive boat like the UL-19 deserves an equally aggressive two-blade
propeller. The UL-19's propeller lets you take full advantage of the
hull's performance. It features a high-pitch, high rake stainless steel
propeller that produces a tight thrust cone that results in better
propulsion and higher speeds that won't overload the electronics. You'll
be able to reach speeds on 4S that could only be reached on 6S by other
boats.
Interference-free connection
The
included Spektrum DX2E DSMR® 2.4GHz transmitter will provide a clear,
precise connection while the hydroplane is on the water.
Aluminum adjustable propeller strut
Use
the aluminum adjustable propeller strut to tune the boat to various
water conditions, from glass smooth to windy and choppy. The
square-bottom propeller strut allows more precise adjustments by acting
similar to a trim tab usually found on Deep-V boats.
Aluminum break-away rudder
The
aluminum rudder features a break-away design that will safeguard the
transom if the hydroplane hits an immovable object on the water or runs
ashore.
Stainless steel turn fin
The
stainless steel turn fin will keep the boat glued to the water whether
you're going straight or full throttle through a turn.
Includes:
- UL-19 Hydroplane Boat
- Spektrum™ DX2E 2.4GHz Transmitter
- Spektrum SR310 DSMR 3-Channel Receiver
- Dynamite® 120A Marine Brushless Maring 2-6S ESC
- Dynamite Marine Brushless Motor, 2000Kv
- Spektrum 3KG Servo
- User Manual
Requires:
- Two 2S-3S 5000mAh, 50C LiPo Battery with EC5 Connector
- Lipo Battery Charger
- Four AA Batteries
features
- Fiberglass hull with matching canopy and removable vertical fins
- Powerful waterproof electronics
- Dynamite® 2000Kv brushless motor
- Spektrum™ DX2E 2.4GHz transmitter
- Stainless steel two-blade propeller
- Interference-free connection
- Aluminum adjustable propeller strut
- Aluminum break-away rudder
- Stainless steel turn fin
specs
Approximate Assembly Time: No assembly required
Beam: 16 in (406.4mm)
Boat Type: Hydroplane
Completion Level: Ready-To-Run
Drive System: Flex Shaft
Hull Height: 6 in (152.4mm)
Hull Material: Fiberglass
Length: 30 in (762mm)
Motor Size: 3650 6 Pole Marine Motor 2000Kv (installed)
Propeller Size: 1.7 x 1.6
Radio: DX2E (included)
Recommended Battery: (2) 7.4V 5000MAH 2S 50C LiPo, with EC5 connector (sold separately)
Scale: 30 inch
Speed Control: 120A (installed)
Steering: Rudder
Trim Colors: Blue and Yellow
Type: RTR Hydroplane
Weight: 5 lbs (2300g)
Pro Boat UL-19 30-inch Hydroplane RTR PRB08028 Pro Boat ARID0519
- Product Code: ARID0519
The ready-to-run Pro Boat® UL-19 30-inch Brushless Hydroplane.
Its design is ultra sleek, with no turbine housing or rear spoiler. And
boy is it fast-you can cruise up to speeds of 50+ mph on 6S power thanks
to the 6-pole water-cooled motor and 120A ESC. A waterproof Spektrum™
3KG servo lets you take corners at full speed without fear! On top of
that, the UL-19, which is built to NAMBA race specifications, comes
equipped with all the aluminum running gear you need and a stainless
steel turn fin. This is adrenaline-pumping, heart-pounding action you
won't soon forget.
Lightweight, durable fiberglass hull with matching canopy and removable vertical fins
Because
the hull is lightweight and durable, you can push this hydroplane to
max speeds in race condition waters. The canopy, like the hull, is
constructed of hand-laid fiberglass. The vertical fins are removable and
replaceable. In case of a bad crash, they will simply break away
without damaging the hull.
Extreme power from waterproof electronics
The
UL-19 uses a Dynamite® water-cooled 120A, 2-6S ESC that can handle more
amperage than needed to run the boat with authority and speed. The new
2000Kv 6-Pole motor features a large rotor that greatly increases motor
torque.
Stainless steel two-blade propeller
An
aggressive boat like the UL-19 deserves an equally aggressive two-blade
propeller. The UL-19's propeller lets you take full advantage of the
hull's performance. It features a high-pitch, high rake stainless steel
propeller that produces a tight thrust cone that results in better
propulsion and higher speeds that won't overload the electronics. You'll
be able to reach speeds on 4S that could only be reached on 6S by other
boats.
Interference-free connection
The
included Spektrum DX2E DSMR® 2.4GHz transmitter will provide a clear,
precise connection while the hydroplane is on the water.
Aluminum adjustable propeller strut
Use
the aluminum adjustable propeller strut to tune the boat to various
water conditions, from glass smooth to windy and choppy. The
square-bottom propeller strut allows more precise adjustments by acting
similar to a trim tab usually found on Deep-V boats.
Aluminum break-away rudder
The
aluminum rudder features a break-away design that will safeguard the
transom if the hydroplane hits an immovable object on the water or runs
ashore.
Stainless steel turn fin
The
stainless steel turn fin will keep the boat glued to the water whether
you're going straight or full throttle through a turn.
Includes:
- UL-19 Hydroplane Boat
- Spektrum™ DX2E 2.4GHz Transmitter
- Spektrum SR310 DSMR 3-Channel Receiver
- Dynamite® 120A Marine Brushless Maring 2-6S ESC
- Dynamite Marine Brushless Motor, 2000Kv
- Spektrum 3KG Servo
- User Manual
Requires:
- Two 2S-3S 5000mAh, 50C LiPo Battery with EC5 Connector
- Lipo Battery Charger
- Four AA Batteries
features
- Fiberglass hull with matching canopy and removable vertical fins
- Powerful waterproof electronics
- Dynamite® 2000Kv brushless motor
- Spektrum™ DX2E 2.4GHz transmitter
- Stainless steel two-blade propeller
- Interference-free connection
- Aluminum adjustable propeller strut
- Aluminum break-away rudder
- Stainless steel turn fin
specs
Approximate Assembly Time: No assembly required
Beam: 16 in (406.4mm)
Boat Type: Hydroplane
Completion Level: Ready-To-Run
Drive System: Flex Shaft
Hull Height: 6 in (152.4mm)
Hull Material: Fiberglass
Length: 30 in (762mm)
Motor Size: 3650 6 Pole Marine Motor 2000Kv (installed)
Propeller Size: 1.7 x 1.6
Radio: DX2E (included)
Recommended Battery: (2) 7.4V 5000MAH 2S 50C LiPo, with EC5 connector (sold separately)
Scale: 30 inch
Speed Control: 120A (installed)
Steering: Rudder
Trim Colors: Blue and Yellow
Type: RTR Hydroplane
Weight: 5 lbs (2300g)
- Brand: Pro Boat
- Viewed: 9
- Availability: In Stock
$224.82
Tags: boat inch hydroplane prb08028 Boat UL-19 30-inch Hydroplane PRB08028 RC Boat RC Boat Pro Boat UL-19 30-inch Hydroplane RTR PRB08028 Pro Boat UL-19 30-inch Hydroplane RTR PRB08028 RC Boat