Top categories
Quick Links

Cart

Your shopping cart is empty!

Sub-Total: $0.00
Total: $0.00
Poco Electro
Poco Theme

This is the O.S. Speed .21 R2103 Engine for On-Road 1/8 scale Racing with the T-2080SC Silencer Set. The next generation of on-road performance has arrived with the Speed R2103 from O.S.! Capable of a wider range of torque than the R2102, the Speed R2103 dominates even on high-grip surfaces. Superior fuel consumption ensures you get the most mileage from every fill-up. Factory-applied two-color graphics add signature style to this sleek-looking power plant.


Includes:
1x O.S. Speed R2103 Engine
1x 8.5mm Carb Reducer
1x Inner Head
1x T-RP7 Plug
1x Exhaust Seal Ring
1x Tapered Collet
3x Carb Dust Seal Caps
1x Instructions
1x T-2080SC Silencer Set


Requires:
Fuel: 10-30% nitro content, 20% recommended for break-in
Glow starter and track equipment


  • Compatible with 16% nitro fuel, which complies with EFRA regulations
  • Crankshaft features DLC (Diamond Like Coating), and an embedded tungsten weight
  • T-2080 Pipe Set, constructed of polished aluminum and tuned for competition.
  • Outer head with factory-applied two-color graphics.
  • Second inner button head allows for finer tuning to meet track conditions.
  • Slide valve carburetor
  • 8.5mm reducer installed in carburetor venturi to reduce amount of air flow for greater torque
  • Factory applied two color graphics
  • Turbo RP7 glow plug
  • Includes exhaust seal ring, tapered collet and three carb dust seal caps


Carburetor Settings;
Needle Valve:Three turns open from fully closed position
Mixture Control Valve:Flush with carburetor body, adjusting range
+/- 1 turn
Metering Needle:Flush with ball link body
Throttle Stop Screw:0.5mm from side of carburetor body when
viewed from above

Displacement: .213 cu in (3.49 cc)
Bore: 0.633 in (16.08 mm)
Stroke: 0.677 in (17.2 mm)
Practical RPM: 4,000-45,000
Power Output: 2.8 ps/2.76 hp @ 33,000 rpm
Weight: 11.99 oz (340 g)
Crankshaft Size: UNF1/4-28
Distance Between Mounting Holes Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.45" (37mm)
Height Bottom of Mounting Tabs/Top of Cylinder Head: 2.9" (75.6mm)
Height Bottom of Mounting Tabs/Center of Exhaust Outlet: 1.1" (28mm)
Width of Mounting Tabs: 1.8" (45mm)
Distance from Backplate to Front Bearing: 2.5" (64.5mm)
Distance from Center of Crankcase to Front Bearing: 1.7" (44mm)
Distance from Center of Crankshaft to Backplate: 0.81" (20.5mm)



O.S. Engines Speed R2103 Engine with T-2080SC Pipe Set OSM1AY01 O.S. Engine ARID0869

  • Product Code: ARID0869

This is the O.S. Speed .21 R2103 Engine for On-Road 1/8 scale Racing with the T-2080SC Silencer Set. The next generation of on-road performance has arrived with the Speed R2103 from O.S.! Capable of a wider range of torque than the R2102, the Speed R2103 dominates even on high-grip surfaces. Superior fuel consumption ensures you get the most mileage from every fill-up. Factory-applied two-color graphics add signature style to this sleek-looking power plant.


Includes:
1x O.S. Speed R2103 Engine
1x 8.5mm Carb Reducer
1x Inner Head
1x T-RP7 Plug
1x Exhaust Seal Ring
1x Tapered Collet
3x Carb Dust Seal Caps
1x Instructions
1x T-2080SC Silencer Set


Requires:
Fuel: 10-30% nitro content, 20% recommended for break-in
Glow starter and track equipment


  • Compatible with 16% nitro fuel, which complies with EFRA regulations
  • Crankshaft features DLC (Diamond Like Coating), and an embedded tungsten weight
  • T-2080 Pipe Set, constructed of polished aluminum and tuned for competition.
  • Outer head with factory-applied two-color graphics.
  • Second inner button head allows for finer tuning to meet track conditions.
  • Slide valve carburetor
  • 8.5mm reducer installed in carburetor venturi to reduce amount of air flow for greater torque
  • Factory applied two color graphics
  • Turbo RP7 glow plug
  • Includes exhaust seal ring, tapered collet and three carb dust seal caps


Carburetor Settings;
Needle Valve:Three turns open from fully closed position
Mixture Control Valve:Flush with carburetor body, adjusting range
+/- 1 turn
Metering Needle:Flush with ball link body
Throttle Stop Screw:0.5mm from side of carburetor body when
viewed from above

Displacement: .213 cu in (3.49 cc)
Bore: 0.633 in (16.08 mm)
Stroke: 0.677 in (17.2 mm)
Practical RPM: 4,000-45,000
Power Output: 2.8 ps/2.76 hp @ 33,000 rpm
Weight: 11.99 oz (340 g)
Crankshaft Size: UNF1/4-28
Distance Between Mounting Holes Same Side: 0.83" (21mm)
Distance Between Mounting Holes Opposite Side: 1.45" (37mm)
Height Bottom of Mounting Tabs/Top of Cylinder Head: 2.9" (75.6mm)
Height Bottom of Mounting Tabs/Center of Exhaust Outlet: 1.1" (28mm)
Width of Mounting Tabs: 1.8" (45mm)
Distance from Backplate to Front Bearing: 2.5" (64.5mm)
Distance from Center of Crankcase to Front Bearing: 1.7" (44mm)
Distance from Center of Crankshaft to Backplate: 0.81" (20.5mm)




$340.12

Size chart
Popup
Ask Question

Online payment
Easy Return
24x7 Service
0/50 reviews
Write a review