This is the 8IGHT-T Nitro 1/8 scale 4WD truggy that's RTR. If you are
serious about becoming a competitive nitro truggy racer, this is the
place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely
assembled and equipped with the brute power of a Dynamite® .28 nitro
engine and the precise response that only a Spektrum™ DSMR® radio system
can provide. You also get the benefit of a pre-set suspension that
shares the same geometry team drivers use on their 8IGHT-T truggies. As
your skills progress and you gain more racing experience, you can
gradually upgrade the vehicle's performance with many of the 8IGHT-T
option parts currently available.
Requires:
- 20–30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
Heavy-Duty Steering and Gen III Radio Tray
The
vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering
servo that maintains superb holding power and precise control on the
roughest tracks. A Gen III radio tray prolongs steering and throttle
servo life with features like ball-bearing linkages and more accurate
linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A
powerful Dynamite .28 nitro engine gives you all the grunt you need to
be a front runner, right out of the box. It is equipped with a
convenient pull-start so you don't have to buy a starter box to get
racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A
metal-gear transmission and sealed differentials give the truggy all
the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The
suspension geometry is pre-set from the factory to match that used by
professional team drivers so you can hit the track with confidence. And
because it uses fixed-length turnbuckles and steering arms, you know it
will remain consistent race to race.
features
- Your fast track to nitro truggy racing
- 4mm T-6 aluminum chassis plate
- Spektrum™ ultra-torque waterproof metal-gear steering servo
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Metal-gear transmission and sealed differentials
- Pre-set suspension geometry
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
- Spektrum™ waterproof metal-gear servo
- Includes Spektrum DX2E DSMR® transmitter
- Includes Dynamite 1600mAh 6V NiMH receiver pack
specs
Type: Nitro Truggy
Scale: 1/8
Length: 18.75 in (476mm)
Width: 16.38 in (416.1mm)
Height: 7.30 in (185.5mm)
Wheelbase: 14.93-15.09 in (379-383mm)
Chassis: 4mm Plate, Aluminum
Suspension: 4-wheel Independent
Drivetrain: 4WD
Tire Type: Losi XTT
Motor or Engine: Dynamite .28 Nitro Engine
Radio: DX2E
Servos: Included
Batteries: Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch: 1.0Mod
Kit/RTR: RTR
Shock Type: 15mm bore, Composite
Body: Painted/Screened
Ball Bearings: Full Precision Ball Bearings
Fuel Tank Capacity: 150cc
Experience Level: Beginner
Recommended Environment: Outdoor
Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR LOS04011
- Product Code: ARID0164
This is the 8IGHT-T Nitro 1/8 scale 4WD truggy that's RTR. If you are
serious about becoming a competitive nitro truggy racer, this is the
place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely
assembled and equipped with the brute power of a Dynamite® .28 nitro
engine and the precise response that only a Spektrum™ DSMR® radio system
can provide. You also get the benefit of a pre-set suspension that
shares the same geometry team drivers use on their 8IGHT-T truggies. As
your skills progress and you gain more racing experience, you can
gradually upgrade the vehicle's performance with many of the 8IGHT-T
option parts currently available.
Requires:
- 20–30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
Heavy-Duty Steering and Gen III Radio Tray
The
vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering
servo that maintains superb holding power and precise control on the
roughest tracks. A Gen III radio tray prolongs steering and throttle
servo life with features like ball-bearing linkages and more accurate
linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A
powerful Dynamite .28 nitro engine gives you all the grunt you need to
be a front runner, right out of the box. It is equipped with a
convenient pull-start so you don't have to buy a starter box to get
racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A
metal-gear transmission and sealed differentials give the truggy all
the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The
suspension geometry is pre-set from the factory to match that used by
professional team drivers so you can hit the track with confidence. And
because it uses fixed-length turnbuckles and steering arms, you know it
will remain consistent race to race.
features
- Your fast track to nitro truggy racing
- 4mm T-6 aluminum chassis plate
- Spektrum™ ultra-torque waterproof metal-gear steering servo
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Metal-gear transmission and sealed differentials
- Pre-set suspension geometry
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
- Spektrum™ waterproof metal-gear servo
- Includes Spektrum DX2E DSMR® transmitter
- Includes Dynamite 1600mAh 6V NiMH receiver pack
specs
Type: Nitro Truggy
Scale: 1/8
Length: 18.75 in (476mm)
Width: 16.38 in (416.1mm)
Height: 7.30 in (185.5mm)
Wheelbase: 14.93-15.09 in (379-383mm)
Chassis: 4mm Plate, Aluminum
Suspension: 4-wheel Independent
Drivetrain: 4WD
Tire Type: Losi XTT
Motor or Engine: Dynamite .28 Nitro Engine
Radio: DX2E
Servos: Included
Batteries: Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch: 1.0Mod
Kit/RTR: RTR
Shock Type: 15mm bore, Composite
Body: Painted/Screened
Ball Bearings: Full Precision Ball Bearings
Fuel Tank Capacity: 150cc
Experience Level: Beginner
Recommended Environment: Outdoor
- Brand: Losi
- Viewed: 43
- Availability: In Stock
$209.10
Tags: losi 8ight nitro truggy los04011 truck Losi 8IGHT-T Nitro Truggy LOS04011 Car & Truck Car & Truck Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR LOS04011 Losi 8IGHT-T Nitro 1/8 4WD Truggy RTR LOS04011 Car & Truck