This is the HPI Racing RTR Sprint 2 Drift 1/10 Scale 4WD RTR with the Nissan 350Z Body. The RTR Sprint 2 Drift is now better than ever! HPI has taken the proven Sprint 2 platform and added a 2.4GHz radio system, pre-painted bodies, waterproof electronics, LIPO-capable electronic speed control, 7.2V battery pack with AC wall charger, AA batteries for the transmitter, and orange anodized chassis parts. And it's all pre-built to precise factory specs to get you drifting quickly.
Includes:
- HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body
- Motor
- Electronic speed control
- Clear body
- Tires
- Foam inserts
- Wheels
- 2000mAh battery
- Wall charger
- Radio batteries pinion gear
- 87 tooth spur gear
- 2.4GHz radio
- Servo
- Two decal sheets
- Instructions
Requires: Building and track equipment
features
- Chassis: 3/16" (4mm) plastic
- Drive: Four wheel belt drive
- Motor: 15 turn Firebolt, brushed
- Radio: HPI TF-40 2.4GHz with waterproof steering servo and waterproof receiver box
- Electronic Speed Control: HPI SC-15WP LiPo compatible, waterproof and reversible
- Battery: 7.2V 2000mAh
- Battery Charger: AC wall type
- Ball Bearings: Full set included
- Shocks: Oil-filled, plastic bodied, with special springs for drifting
- Differentials: Planetary gear
- Transmission: Single speed
- Tires: Falken Azenis hard compound drift type X-pattern, 1" (26mm) wide, 2.5" (65mm) outer diameter
- Wheels: Officially licensed TE37 Rays/Volk design 5-spoke brown on color, outer diameter 1.9" (48mm), width 1" (26mm), 3mm offset in front and 6mm offset in rear for wide look seen on full-size drift cars
- Pinion Gear: 48 pitch steel
- Spur Gear: 48 pitch, 87 tooth, composite construction
- Body: Painted and trimmed Nissan 350Z
- Bumpers: Front, foam
- Suspension: Fully adjustable
- Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Steering: Bell-crank type with servo saver
specs
Vehicle
Length: 17" (431mm)
Width: 7.5" (190mm) - 8.0" (190mm) adjustable using offset wheels
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7" (194mm)
Front Tread: 6.5" (166mm)
Rear Tread: 6.8" (173.5mm) side-to-side at wheel centers
Ground Clearance: 0.31" (8mm)
Body
Length: 16.5" (419mm)
Width: 7.7" (195mm) at rear wheels (widest point)
Width: 7.1" (180mm) behind from wheels (thinnest point)=
Height: 5" (127mm)
Length: 17" (431mm)
Width: 7.5" (190mm) - 8.0" (190mm) adjustable using offset wheels
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7" (194mm)
Front Tread: 6.5" (166mm)
Rear Tread: 6.8" (173.5mm) side-to-side at wheel centers
Ground Clearance: 0.31" (8mm)
Body
Length: 16.5" (419mm)
Width: 7.7" (195mm) at rear wheels (widest point)
Width: 7.1" (180mm) behind from wheels (thinnest point)=
Height: 5" (127mm)
HPI Sprint 2 Drift Car 1/10 RTR Nissan 350Z Body HPI106154 HPI Racing ARID0362
- Product Code: ARID0362
This is the HPI Racing RTR Sprint 2 Drift 1/10 Scale 4WD RTR with the Nissan 350Z Body. The RTR Sprint 2 Drift is now better than ever! HPI has taken the proven Sprint 2 platform and added a 2.4GHz radio system, pre-painted bodies, waterproof electronics, LIPO-capable electronic speed control, 7.2V battery pack with AC wall charger, AA batteries for the transmitter, and orange anodized chassis parts. And it's all pre-built to precise factory specs to get you drifting quickly.
Includes:
- HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body
- Motor
- Electronic speed control
- Clear body
- Tires
- Foam inserts
- Wheels
- 2000mAh battery
- Wall charger
- Radio batteries pinion gear
- 87 tooth spur gear
- 2.4GHz radio
- Servo
- Two decal sheets
- Instructions
Requires: Building and track equipment
features
- Chassis: 3/16" (4mm) plastic
- Drive: Four wheel belt drive
- Motor: 15 turn Firebolt, brushed
- Radio: HPI TF-40 2.4GHz with waterproof steering servo and waterproof receiver box
- Electronic Speed Control: HPI SC-15WP LiPo compatible, waterproof and reversible
- Battery: 7.2V 2000mAh
- Battery Charger: AC wall type
- Ball Bearings: Full set included
- Shocks: Oil-filled, plastic bodied, with special springs for drifting
- Differentials: Planetary gear
- Transmission: Single speed
- Tires: Falken Azenis hard compound drift type X-pattern, 1" (26mm) wide, 2.5" (65mm) outer diameter
- Wheels: Officially licensed TE37 Rays/Volk design 5-spoke brown on color, outer diameter 1.9" (48mm), width 1" (26mm), 3mm offset in front and 6mm offset in rear for wide look seen on full-size drift cars
- Pinion Gear: 48 pitch steel
- Spur Gear: 48 pitch, 87 tooth, composite construction
- Body: Painted and trimmed Nissan 350Z
- Bumpers: Front, foam
- Suspension: Fully adjustable
- Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Steering: Bell-crank type with servo saver
specs
Vehicle
Length: 17" (431mm)
Width: 7.5" (190mm) - 8.0" (190mm) adjustable using offset wheels
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7" (194mm)
Front Tread: 6.5" (166mm)
Rear Tread: 6.8" (173.5mm) side-to-side at wheel centers
Ground Clearance: 0.31" (8mm)
Body
Length: 16.5" (419mm)
Width: 7.7" (195mm) at rear wheels (widest point)
Width: 7.1" (180mm) behind from wheels (thinnest point)=
Height: 5" (127mm)
Length: 17" (431mm)
Width: 7.5" (190mm) - 8.0" (190mm) adjustable using offset wheels
Height: 5" (127mm)
Wheelbase: 10" (255mm)
Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
Rear Track: 7.7" (194mm)
Front Tread: 6.5" (166mm)
Rear Tread: 6.8" (173.5mm) side-to-side at wheel centers
Ground Clearance: 0.31" (8mm)
Body
Length: 16.5" (419mm)
Width: 7.7" (195mm) at rear wheels (widest point)
Width: 7.1" (180mm) behind from wheels (thinnest point)=
Height: 5" (127mm)
- Brand: HPI Racing
- Viewed: 6
- Availability: In Stock
$135.73
Tags: sprint drift nissan 350z body hpi106154 truck racing Sprint Drift 1/10 Nissan 350Z Body HPI106154 Car & Truck Car & Truck HPI Sprint 2 Drift Car 1/10 RTR Nissan 350Z Body HPI106154 HPI Sprint 2 Drift Car 1/10 RTR Nissan 350Z Body HPI106154 Car & Truck