This is the HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5.
Introducing the brand new HPI Racing 2015 Ford Mustang RTR Spec 5 RS4
Sport 3! Bringing the awesomeness of Vaughn Gittin Jr’s RTR Spec 5 into
your hands in 1/10th scale RC form, the latest RS4 Sport 3 kit is ready
to rock your RC world! The super realistic Ford Mustang RTR Spec 5 body
is coupled with a set of replica HRE Tech 7 wheels for over the top
scale realism. Under the hood, this 1/10th scale Mustang is equipped
with the latest HPI Racing Touring Car chassis, the RS4 Sport 3. With
full-time shaft driven 4WD, a fully sealed drivetrain, waterproof 2.4
GHz electronics/radio gear, fully independent double wishbone suspension
and adjustable oil filled shocks it’s Ready to Rock in any condition.
Includes:
- HPI RS4 Sport 3 On-Road Car with 2015 Mustang Body
- Battery
- Charger
- Radio
- ESC
- Motor
- Four AA Batteries
- Instructions
- 27T Pinion Gear
- 75T Spur Gear
Requires: Track and maintenance equipment
- Chassis: Plastic
- Drive: Fully enclosed four wheel shaft
- Radio: HPI TF-11 2.4GHz
- Motor: HPI 15T Firebolt, longitudinally mounted
- Electronic Speed Control: Waterproof SC-3SWP2
- Differentials: Sealed metal gear, capable of handling brushless power
- Body: Ford Mustang Spec 5 trimmed and painted with all sponsor decals applied
- Shocks: Composite body, oil filled
- Suspension: Double wishbone
- Wheels: Neon green composite plastic, width: 1.02" (26mm), diameter 1.9" (48mm)
- Tires: Treaded rubber
- Ball Bearings: Complete set
- Battery: HPI Plazma 7.2V NiMH 2000mAh with standard connector
- Battery Charger: AC powered wall type
- Battery Compartment: Holds standard LiPos and up to 7-cell NiMH batteries, adjustable for extra traction or increased steering, thick hook and loop straps hold battery in place
- Front Bumper: Foam
- Pinion Gear: Steel, 48P 27 tooth
- Spur Gear: Molded plastic, 48P 75 tooth
- Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Warranty (by the manufacturer): 2-year limited through manufacturer, valid only in USA, Canada and South America
Vehicle
Length: 16.9" (430mm)
Width: 7.4" (190mm)
Height: 4.9" (125mm)
Wheelbase: 10" (255mm)
Body
Length: 17" (432mm)
Width: 7.7" (198mm) behind front wheels-narrowest point, 8.1" (207mm) at rear wheels-widest point
Height: 4.7" (120mm)
HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5 HPI115126 HPI Racing ARID0358
- Product Code: ARID0358
This is the HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5.
Introducing the brand new HPI Racing 2015 Ford Mustang RTR Spec 5 RS4
Sport 3! Bringing the awesomeness of Vaughn Gittin Jr’s RTR Spec 5 into
your hands in 1/10th scale RC form, the latest RS4 Sport 3 kit is ready
to rock your RC world! The super realistic Ford Mustang RTR Spec 5 body
is coupled with a set of replica HRE Tech 7 wheels for over the top
scale realism. Under the hood, this 1/10th scale Mustang is equipped
with the latest HPI Racing Touring Car chassis, the RS4 Sport 3. With
full-time shaft driven 4WD, a fully sealed drivetrain, waterproof 2.4
GHz electronics/radio gear, fully independent double wishbone suspension
and adjustable oil filled shocks it’s Ready to Rock in any condition.
Includes:
- HPI RS4 Sport 3 On-Road Car with 2015 Mustang Body
- Battery
- Charger
- Radio
- ESC
- Motor
- Four AA Batteries
- Instructions
- 27T Pinion Gear
- 75T Spur Gear
Requires: Track and maintenance equipment
- Chassis: Plastic
- Drive: Fully enclosed four wheel shaft
- Radio: HPI TF-11 2.4GHz
- Motor: HPI 15T Firebolt, longitudinally mounted
- Electronic Speed Control: Waterproof SC-3SWP2
- Differentials: Sealed metal gear, capable of handling brushless power
- Body: Ford Mustang Spec 5 trimmed and painted with all sponsor decals applied
- Shocks: Composite body, oil filled
- Suspension: Double wishbone
- Wheels: Neon green composite plastic, width: 1.02" (26mm), diameter 1.9" (48mm)
- Tires: Treaded rubber
- Ball Bearings: Complete set
- Battery: HPI Plazma 7.2V NiMH 2000mAh with standard connector
- Battery Charger: AC powered wall type
- Battery Compartment: Holds standard LiPos and up to 7-cell NiMH batteries, adjustable for extra traction or increased steering, thick hook and loop straps hold battery in place
- Front Bumper: Foam
- Pinion Gear: Steel, 48P 27 tooth
- Spur Gear: Molded plastic, 48P 75 tooth
- Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Warranty (by the manufacturer): 2-year limited through manufacturer, valid only in USA, Canada and South America
Vehicle
Length: 16.9" (430mm)
Width: 7.4" (190mm)
Height: 4.9" (125mm)
Wheelbase: 10" (255mm)
Body
Length: 17" (432mm)
Width: 7.7" (198mm) behind front wheels-narrowest point, 8.1" (207mm) at rear wheels-widest point
Height: 4.7" (120mm)
- Brand: HPI Racing
- Viewed: 9
- Availability: In Stock
$135.73
Tags: racing sport ford mustang spec hpi115126 truck Racing Sport 2015 Ford Mustang Spec HPI115126 Car & Truck Car & Truck HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5 HPI115126 HPI Racing RS4 Sport 3 2015 Ford Mustang RTR Spec 5 HPI115126 Car & Truck